Moisture Analyser 0.001 g / 0.01 % 60g capacity

Overview:

In many fields, a moisture analyzer is a necessary tool for quality control requirements. With the MOC63u, you can easily obtain accurate data. Simply place material on the pan and shut the cover. The MOC63u will start to measure. The MOC63u adapts to various materials and increases your work efficiency. 

Features:

• Long-life and high power halogen heater provides quick and accurate measurement.
• The temperature can be changed from 50 degrees to 200 degree Celsius.
• You can check sample status from window while measurement. 

• MOC63u has large pwn. (95mm diameter)
• It can provide quick and accurate measurement to spread sample in thin layer on the pan. 

Data management and easy operation:

• Built-in USB port: The measure results can be transferred by USB cable. If connect with PC by USB, needs USB driver. 
• WindowsDirect: end balance data to Excel or other Windows applications without installing additional data communication software. By combining standard Auto print functions with typical spreadsheet functions, even difficult applications can be easily automated. 
• Easy operation using a simple keypad

• Automatic ending mode: Automatically ends measurement when moisture loss over the previous 30 seconds becomes smaller than specified percentage. 
• Timed ending mode: Automatically ends measurement when the specified amount of time has elapsed. 
• Rapid drying mode: First dries with the highest temperature for the specified period, then shifts to the specified temperature, shortening measurement time. 
• Slow drying mode: Gently heats samples that might solidify at the surface or samples that reduce under high temperature. 
• Step drying mode: Allows step-by-step change in drying conditions. This feature is useful when measuring samples that contain a large amount of water. 
• Automatic starting mode: Starts measurement immediately after closing the lid. It saves time in repeat measurements.