Millipak 0.22um membrane filter for particulate-free and bacteria-free water at the point of dispense. Milli-Q® systems offer a unique combination of optimized water purification and monitoring technologies. The selection of the proper ultrapure water system for your laboratory will depend on several parameters such as: feed water available, daily volume needs, monitoring requirements, certification levels expected and any other specific requirements you may have. Purification cartridges play a core role in the water purification process as their objective is to remove key contaminants. To gain optimal performance, R&D expertise, design and development is required. Each consumable has been validated to warrant its quality. Our unique manufacturing site based in Molsheim, France produces all its products according to strict Quality Assurance procedures. Each product is marked with a Merck Millipore label, authenticating its quality and origin. Non-sterile unit, delivered hermetically sealed with its Certificate of Quality. Information: Media: Durapore PVDF Bacterial retention: Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10? CFU/cm² using ASTM® F838 methodology. Wettability: Hydrophilic Physiochemical Information Pore Size: 0.22 µm Inlet Connection: NPT 1/4 inch diameter Outlet Connection: Hose Barb 1/4 inch diameter Gravimetric Extractables: The extractables level was equal to or less than 1.5 mg per device after 24 hours in water at controlled room temperature. Non-Fiber Releasing: This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). USP Bacterial Endotoxins: A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.

Link to Certificate of Quality

CoQ Sheets - click here