Lab pH/Ion meter CPI-505

Catalogue Number: IONELCP-I505

CPI-505 Description

• Measures accurately: pH, redox potential, ion concentration in pX, g/l, M/l, or ppm and temperature (°C).
• The meter is equipped with large, easy-to-read backlit LCD display with brightness control.
• Enables ion concentration measurements of monovalent, bivalent, negative and positive ions.
• Separate isolated connectors for pH and Ion Selective Electrode enable their simultaneous connecting and measurements in one vessel.
• The range of the meter enables work with all available ion selective electrodes (ISE), chosen adequately to the kind of measured ion, equipped with BNC 50 connector.
• Entering automatically the molar weight of a particular ion.
• Automatic unit conversion (e.g. mol/l to mg/l).
• Possibility of entering freely chosen values of ion standard solutions.
• Automatic and manual temperature compensation.
• The meter stores 3 characteristics of pH electrodes and ion selective electrodes independently.

pH Measurement

• Calibration of the pH electrode: 1 ÷ 5 points.
• Automatic pH buffer detection, their value may be set by the user.
• Automatic correction of the stored pH standard value influenced by the temperature change (compliant with NIST).
• Information about the pH electrode’s condition.
• Depending on type of the chosen electrode making measurement in pure water, sewage, pastes, etc.
• Internal datalogger for up to 4000 sets of results with temperature, time and date.
• Collecting series of readouts with intervals set by the user.
• Possibility to enter the next calibration date into memory.
• USB output.
• The meter meets the GLP requirements.
• Internal clock with date