Catalogue: 1224114
Benefits
- Increased throughput and speed of sample preparation.
- Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for better handling of small sample volumes or costly samples.
- Increased operating pressure up to 130 psi due to the over-mold that prevents sample leaking at the seam and keeps the filter unit from bursting in half.
- Strict quality control: Syringe filters are integrity-tested to ensure a proper filter fit and weld to eliminate any potential filter by-pass.
- Accurate labeling: Each filter is labeled with the specific filter material and pore size for easy identification even if the syringe filter is not in its original packaging.
Characteristics
Housing: Pure polypropylene is heat-sealed without the use of glues or sealants
Autoclavable: Yes
Prefilter: 1.0 micron binderless glass-fiber
Effective Filtration area: 4.8 cm2 (0.74 inch3)
Housing diameter: 33 mm
Membrane diameter: 30 mm
Holdup volume: < 100 microliter
Sample volume: < 120 mL without prefilter
Inlet/outlet: FLL-MLS
Maximum Operating Temperature: 82°C / 180°F
Maximum Operating Pressure: 80 psi
| SPECIFICATIONS |
|
| Product code |
1224114 |
| Description |
Syringe filter NON sterile diam.30 mm FLL/MLS PP neutral membr.NY66 0.45 µm (500 pcs) |
| Membrane diameter (mm) |
30 |
| Membrane material |
NYLON |
| Pore size (µm) |
0.45 |
| Housing diameter (mm) |
33 |
| Color |
Transparent |
| Inlet / outlet |
Female luer lock/Male luer slip |
| Effective filtration area (cm2) |
4.8 cm2 |
| Applications |
Analytical Sample Prep, HPLC; Dissolution testing; Content uniformity; Environmental samples; Composite assays; Analysis of Biological and Organic Fluids; Food Analysis |
| Box quantity |
500 |